Micca EP950 Firmware Update Instructions and Release Notes

When possible, firmware update should be performed using the recovery mode. This results in the loss of all user settings, but it is the recommended firmware update method. Please follow these steps exactly as described to perform a firmware update in recovery mode:

1. Download the latest the firmware from our website.
2. Unpack the firmware ZIP file and copy the install.img file onto an empty USB drive and plug it into the media player. Do not use a SD/SDHC memory card.
3. Connect the HDMI cable to the player and set the TV to the appropriate input.
4. Unplug the AC adapter from the EP950, wait 10 seconds, and plug it back in.
5. Using a paper clip or tooth pick, press and hold the small pinhole recovery button on the back of the player.
6. While pressing the recovery button, press and release the power button on the front of the player.
7. Continue to hold the recovery button for 5 more seconds, then release it.
8. The recovery mode will begin upgrading the firmware from the USB drive while displaying the following screen.
9. When finished, the player will reboot and display the initial setup screen:

Firmware Release Notes:
Version 1.0.3.9 - March 2012
- Sets default output refresh rate to 59.94Hz.
- Fixes flash memory card support issues.

Version 1.0.3.7 - February 2012
- Fixes audio problem with HDMI audio is set to auto and HD audio is set to output 5.1 core.
- Updated Telnet, BT, and SAMBA packages.
- Fixes YouTubeXL app crashing.
- Fixes idx+sub subtitle display issues.

Version 1.0.2.7 - February 2012
- Fixes instability when navigating the Youtube application.
- Fixes missing host name for SAMBA.

Version 1.0.2.6
- Initial Release

Return To: